Tim Stafford Surfboards

Mostly bonzer inspired creations, made in Cornwall. Designed, shaped, glassed, sanded, finned and finished by Tim Stafford.

I make boards that are easy to ride, that feel natural under foot. Most aren't conventional but they will help you reach that point where you stop thinking about what's under your feet and start to focus on where you want to go and how you want to get there. Why bonzers?

Always happy to chat about your needs and what would work for you but please initiate contact by email or Facebook... details on www.timstaffordsurfboards.com | Ride and glide.
Showing posts with label longboard. Show all posts
Showing posts with label longboard. Show all posts

Friday, 29 March 2013

The Joker

A review by Jon Price of the Joker… which he liked so much he bought off me… no matter how hard i tried to get him to have a custom he wanted what he had ridden and enjoyed, so eventually i succumbed. Here is what he thinks.

“I am without doubt a surfboard monogamist. I truly believe that a surfer’s boards should evolve from one to the next, that the shape of a new ‘stick’ should be based around the characteristics that were liked and disliked on the last one, i.e. “I love the way this board paddles but I want it to turn harder”. Having evolved through a series of boards over a few years, I felt as though I had found exactly what I wanted and I’d stuck with it. However, that was seven years ago. I was married and happily so. Until Tim came along.

The Joker was Tim’s first longboard. With any shaper this would cause me concern. With Tim I needn’t have worried. I’ve only ever met one other shaper with the same obvious understanding of surfboard dynamics and believe me with nearly two decades experience in the surf industry, I’ve talked to a lot of well-known shapers. Unlike many who seem intent on surrounding their art with mysticism, Tim explains things in a way that is logical, straight forward and makes sense; the guy obviously knows his stuff. He is also a friend of mine and that meant I was open to persuasion, a lot of persuasion. Maybe it was time to try something new.

On one of those fun, clean, chest-high beach break days, I finally gave in; I started my affair. At first I didn’t like it. I was so used to my board that I got frustrated rather than patiently adapting my technique to suit a board that paddled differently, was more responsive and was just......... different. I gave up, claiming my old board back after a few waves. Glad to be back on the board I knew and trusted.

A week later, more ear-bending from Tim and I gave The Joker another try. This time something clicked. I dropped, bottom-turned and cross-stepped to the nose. I couldn’t believe how stable this board was for nose riding! Tim will tell you it’s to do with the way the nose flexes as you stand on it. I didn’t care. I just know I liked it, I liked it a lot. A slower section, I walked back to the tail, made a couple of turns to build up speed and ‘wack’, hit the lip on the close-out. Man, where did that come from? Tim didn’t say a word as I paddled back out, my smile was enough. This time it was a little harder for him to get his board back.

I have to say it has taken me a while to get used to The Joker, to feel as though I’m getting to know it in that ‘one’ way I have with my other board. And, unsurprisingly, at times I go back to my ‘wife’ of seven years. On occasion I find The Joker, with its continuous rocker, a little awkward to paddle and that’s something I’ll ask Tim to address on the next evolution; when I start my next affair. The thing about the Joker is, I’ve never spent so much time on the nose. This board nose rides so easily! What really gets me though is that it turns hard as well. I find it hard to comprehend that combination; a longboard that nose rides and turns well. How do you make a board like that? I guess you’d better ask Tim. I’m just glad he isn’t a marriage counsellor.

Jon Price, Big Blue

P1060108

Monday, 3 December 2012

Hot

Today’s hot coat on the asymmetric long(ish)… laps only. These will be sanded back before a final gloss coat… all in the interests of reduced weight but equal strength.

Going to be a logo free deck with a little ink on it…

P1080365

P1080372

Saturday, 4 February 2012

A lot going on…

I love this point of the process. Everything cut, squared, flat, symmetrical ready for the fun bits… 2012-02-01_16-41-09_302 2012-02-03_16-23-55_597 2012-02-03_16-29-01_554

EVO6 Bump stinger 7’11” x 21 7/8” x 2 7/8”…

Spherical rocker, bonzer EVO concaves with feeder channels up front forward of the stings  (based on MCs light vehicle concept). Concave shovel flex nose (same as the Joker) and cheek flex tail (same as the Atlantic POD)…

Monday, 7 November 2011

EVO3 from Glass Tiger

This was Mark’s first bonzer longboard, done a while back and one of the first boards we collaborated on… although my help was pretty much limited to the EVO3 bonzer template, angles and positioning.

Beautiful wood – walnut fins I think (correct me if I’m wrong Mark).

Mark and I still have a board in the pipeline, a kevlar carbon FreakFish but he’s been pretty busy so you won’t be seeing it anytime soon unless I get some wood and a vacuum bag!

P1010002

Monday, 10 October 2011

I’m “out”… I love a longboard!

Shovel(flex)nose bonzer EVO6 longboard… I have to say (and please bear in mind I am a shortboarder) that I LOVED this longboard… form the first take-off the board felt incredibly intuitive and had me walking up to the nose so easily. It is really stable up front due to the quite parallel rail line from the shovel nose and seemed to allow me more time up there than was reasonable, especially for a shortboarder! It would turn from the middle very naturally too, which was unexpected, and off the tail i could easily pull it into roundhouses. I have only ridden it as an EVO6 with MR rears so far and it works so well I am wondering if I’ll ever get a single fin in the box! And of course then there’s the resin band… straight off a lovely Havana Corona. If I was to make a tweak it would be to lower the rail apex just a touch through the rear 1/3 of the board for even more sensitivity…

It’s a very special board that has far exceeded my expectations and made me seriously question what board to pull out when the surf’s good! So I’m “out”… I love a longboard!

image

Friday, 23 September 2011

The Joker, finished…

9’2” x 22 7/8” x 3”. Resin tint with clear nose inlay. Resin “cigar band” with metallic and double pinlines. Wood bonzer EVO5/6 runners in American Ash for positive buoyancy. FCS EVO6 or single fin 10” box for a more traditional ride.

Shovel flex nose with a teardrop concave, through into rolled V in the middle and double concave with bonzer feeders exiting the narrow square tail. Soft rails through to hard.

This board has taken some time – the resin bands alone being a bit of a labour of love…  it’s complex, it’s complicated, it flies in the face of fashion and their is a lot for people to get their head around. My favourite board ever (and its a longboard!) I love it…

P1060108 P1060110 P1060120P1060113 P1060115 P1060118P1060121 P1060122

Tuesday, 30 August 2011

Resin bands…

Nearly finished the resin bands… then just pinlines, gloss and polish to finish this one off finally. Been a little slow as had to prioritise the fish for September 17th Fry… more pics of those soon.

P1050971

Friday, 12 August 2011

Busy day…

Finally got started on the resin band on the Joker. Pulled the tape at the perfect time Smile. Daz glossing a Campbell Bros Bonzer 5. My porpoise taped up ready for tomorrows glassing marathon… 2011-08-12_15-40-05_234 2011-08-12_16-38-34_3042011-08-12_15-40-41_155 2011-08-12_17-17-02_718

Wednesday, 29 June 2011

Get plugged

P1050828 P1050831

FCS rears for the EVO6 set up going in tomorrow…

Tuesday, 14 June 2011

Joker resin bands

Resin bands planned for the Joker, below… but finally decided on the resin colour scheme, and the pinlines are going to be resin too, which will add time but be a lovely change from the usual sprayed ones… looking forward to feeling that subtle bump on the rail line as I'm paddling around. If you like this please click on the Facebook like button below and if you hate it send me comment with some other ideas as i probably wont get to this until the end of next week anyway as i still have the bonzer fins to foil out of that lovely American Ash!

I’ve been a bit slow on finishing this one due to other design projects pilling up (including a few eco-renovations at our new place, one of which will be for boards)…  but warming up again with 3 new shortboard bonzers to shape ASAP and a new Glass Tiger collaboration FreakFish to get into the pipeline.

joker-110614

Wednesday, 8 June 2011

More tint

The longboard is now glassed and ready for the bonzer fins in American Ash… probably next week now.

Glassing the concave as a panel has worked really well with a big upside being extra definition of the transition so I should be able to get a really good edge on it. Fin boxes, pinlines and a resin band are also still to come, then finished off with a gloss and polish.

The Joker shovel nose bonzer longboard - Tim Stafford Surfboards resin tint longboard - Tim Stafford Surfboards resin tint longboard with panel nose concave - Tim Stafford Surfboards resin tint 9'0 longboard - Tim Stafford Surfboards

Wednesday, 1 June 2011

Resinating the concave

Part 2 of glassing the Joker EVO5/6 bonzer longboard... 6oz light kelpy tint (red just seemed too shouty for such an unusual board) over the clear preglassed 4oz concave and then trimming out the panel. This will then receive a 4oz clear patch over it once the deck is glassed... more tomorrow.

Clear nose patch tear drop longboard concave from Tim Stafford Surfboards

Friday, 27 May 2011

EVO5/6 longboard bonzer glassing

P1050703 P1050707   P1050710  

Dilemma… I wanted a resin tint and a clear nose concave. The only way I could think how to do this was with a 3 stage glass job on the bottom. 4oz nose concave panel. Next week I'll tint the bottom with 6oz but cut out the panel. Then I’ll put a 4oz patch over the whole thing. The end result will be minimal extra weight and a nice clear spoon concave within the tint.

Friday, 20 May 2011

“Joker” EVO5/6 Longboard bonzer

This is a board I'd been thinking about for some time… a long board with the volume and trimming of a 9’6”+ but the foam and manoeuvrability of something much under 9’0”.

The Joker 9'0 bonzer longboard from Tim Stafford Surfboards P1050697 P1050700

The wide nose is effectively “cut off” and has part of a teardrop concave, with the cut providing an initial straight entry, similar to a Harbour nose channel. This will provide a more stable lift that should trim from the nose through the flatter sections that often pop up on our waves here.

The mid section features a straighter, soft rail line for nose riding and high-line trimming. Don’t expect it to turn from the middle though, this is a board that want to be ridden classically, turn off the tail and walk to the nose.

The tail has a distinct hip to pivot around when you do step back, and then the foiled out narrow tail with bonzer concaves will provide the acceleration, drive and holding power.

The rocker is appropriate for an all rounder of its true length, 5 1/8” in the nose and 3 1/4” in the tail, even and with the apex slightly back to allow for off the lips and floaters when riding off the tail.

Glass job… not sure to go for a classic red tint or clear with some nose bands in khaki + orange pinlines. Views in comments or on facebook welcome.